Innovation

语言版本

Products

Contact Us

Hotline0757-29965888

Phone:18807650558
Fax:0757-29994033
E-mail:sales@lanson-imm.com

With consistent effort of the technical center stuff, Lanson keep developing competitive technology. The products we develop have strong adaptability to the market. As to R&D of technology, Lanson are making unremitting efforts to ensure the innovation spirit of Lanson.
Achievements:
1. Proprietary Name: Arch Fixed Platen

    Proprietary Code: ZL 2012 2 0211584.3
2. Proprietary Name: Accessory support device
   Proprietary Code: ZL 2010 2 0623750.1
3. Proprietary Name: Disconnect-type Moving Platen
   Proprietary Code: ZL 2012 2 0211586.2
4. Proprietary Name: Non-rotating sealed single cylinder plastic injection molding machine
   Proprietary Code: ZL 2011 2 0286592.X
5. Proprietary Name: Non-rotating sealed single cylinder plastic injection molding machine
   Proprietary Code: ZL 2011 2 0286592.X
6. Proprietary Name: Mechanical safety protection device of plastic injectionmolding machine
   Proprietary Code: ZL 2011 2 0286629.9
Standard Model:
  GT2 Series (VDP System) and GT2-S series (Servo System)

  This series is self innovated single cylinder plastic injection molding machine, with the features of high efficiency, low energy consumption, fast response and high precision. It also has 14 national patents.
1. Single Cylinder Injection Unit:
   Injecting cylinder, melting motor and plasticizing screw are in the same centerline, increase injection pressure and speed, accomplish high precision and fast response.
2. Integral injection base with linear guiding rail;
   High positioning accuracy, low sliding friction coefficient, fast response, good repeatability and energy saving.
3. Low restriction energy saving injection unit
   Fuel-efficient design, reduce shooting resistance, more energy saving;
4. Multiple choice plasticizing system
   Equipped with different kind of special screw and barrel based on customer's requirements.
5.Special Arch Fixed Platen
   Using arch fixed platen (Proprietary Code:ZL 2012 2 0211584.3), it can disperse stress, prolong the service life of the template. Through finite element analysis, arch fixed platen efficiently and strictly control deformation of platen.
6.Long use extended toggle
   Increase toggle numbers, pin shaft and steel shear plane, then to improve the service life of pin shaft and steel bushing. Lanson also widen the hinge ear width of moving platen, which disperse stress, avoiding stress concentration.
7.Accurate easy gear mold adjustment
   Using accurate gear mold adjustment, the movements is fluently and quickly. And it is also equipped with automatic mold adjustment function, which reduce adjusting time after mold change.
8.Intelligent control system
   Human interface, easy to operate
9.Variable displacement pump or servo pump
   Less movement inertia, fast response, energy saving, and less noise
GM2 Series (VDP) and GM2-S series (Servo System)
1. Injection Unit Optimal Design

   Better design than traditional double cylinder injection unit, injector base is instead of two point support device, increasing the overall rigidity of injection unit, which injection movement gets more stable. The oil circuit control of injection  unit connect with the injector cylinder directly, improving movement response speed.
2. Tail Platen Optimal Design(Patented Design)
   Using enclosed structure design, increasing the maximum size of tail part, strictly control template deformation.
3. Moving Platen Optimal Design (Patented Design)
   Optimal structure design of moving platen, based on the reality stress situation, it spreads the clamping force from the toggles to the center part of moving platen, which the force passes to mold efficiently, ensuring the precision of product. The special structure design of moving platen also increases the shearing surface of moving platen in maximum way, ensuring stability and power equality.
4. Long use extended toggle
   Increase toggle numbers, pin shaft and steel shear plane, then to improve the service life of pin shaft and steel bushing. Lanson also widen the hinge ear width of moving platen, which disperse stress, avoiding stress concentration.
5. Equipped with steel belt for slide pads of moving platen
   Equipped with steel belt for slide pads for moving platen, guide pillar mountings with self-oiling rings, lubrication greases directly from the top of guide pillar copper bush. These optimal lubrication designs are LANSON's standard equipment for machines.
6. Sealed strengthen machine frame design
   Sealed strengthen machine frame design ensure the detection and maintain of pump and motor. Using oil bypass filter, filtration precision reaches 1 micron.
7. New appearance design
   New light safety door design;
   Active door self-open prevention device (Patented Design)
   Humanization observation mechanical safety interlock
8.Multiple choice plasticizing system
  Equipped with different kind of special screw and barrel based on customer's requirements.
9.Mold adjustment
  Using accurate gear mold adjustment, the movements is fluently and quickly. And it is also equipped with automatic mold adjustment function, which reduces machine adjusting time after mold change.
10.Variable displacement pump or servo pump
   Less movement inertia, fast response, energy saving, and less noise.
GT2-B Series (Thin-wall packaging professional plastic injection molding system)
1.Strengthen enclosed mold clamping device

   Through finite element analysis, strengthen enclosed mold clamping device is morereasonable, and has better strength and stiffness.
2.Integral injection base with linear guiding rail;
   High positioning accuracy, low sliding friction coefficient, fast response, goodrepeatability and energy saving.
3.New optimal screw and barrel team
   The optimal design can lower the temperature of material, which helps good toughness ofproduct.
4.Optimal hydraulic system
   Easy to achieve low pressure injection, good for mechanical prevention, ensure long lifeof mold. It also helps to reduce stress and deformation of product.
5.High Efficiency controlling system
   Faster response; it reaches to the best injection speed within 0.2s.
Special Injection Molding Machine For LGP (light guide plate)
Machine Features:

1.Using non-contact magnetic suspension displacement sensor, ensuring preciseness ofdisplacement output;
2.Integral injection base with linear guiding rail;
3.Professional optical plasticizing components;
4.Energy-saving servo system;
5.Strengthened moving platen with T-Slot, which is suit for various molds;
6.Self-innovated high efficient single cylinder injection device;
GT2-R series (professional medical product plastic injection molding machine)
1.T-Slot platen
   Changing molds faster and easier.
2. Multiple choice plasticizing system.
   Equipped with different kind of special screw and barrel based on customer's requirements.
3. Single Cylinder Injection Unit:
   Injecting cylinder, melting motor and plasticizing screw are in the same centerline,increase injection pressure and speed, accomplish high precision and fast response.
4. Clamping unit with linear guiding rail;
   Precision linear guiding rail achieves no interaction with guide pillar. The device isfast, and stable during mold close and open. Achieves even clamping force, high positionprecision and low energy consumption.
5.European high-performing KEBA controlling system.
   Human interface, easy to operate and strong expansibility.
6.High efficiency energy saving servo system.
   Less movement inertia, fast response, energy saving, and less noise.
7.Clamping unit using sleeve bearing and stainless charging groove.
   Ensuring complete clean production process, avoiding the possibility of producing pollution.